خرید یک Wireless Router مناسب

[terrorhell]

سلام خدمت شما کاربران گرامی

میخواستم یه Wireless Router بخرم که ADSL رو هم بهش وصل کنم و بین 2 کامپیوتر سرویس بده
در مورد سیستم P2p هم مشکل آنتن دهی دارم
میخواستم ببینیم چه مارکی خوبه با قیمت پائین و مناسب برای شرایط من

مرسی

[k-2]

D-Link بگیر....

فعلن

[terrorhell]

ببخشید من مودم ADSLام DLink 200 هست !! میخواستم بگم که از نوع USB هستش !!
یه router خوب و ارزون بهم معرفی کنید که USB بخوره

[hashem_wolf]

TP-link ها رو هم یک نیگاه بنداز! قیمت هاشون هم زیره 100 هست اکثرا!
جند کاره هم هستند بعضی مدل ها:َap- moedm-ruoter_switch

[!l@]

ببخشید من مودم ADSLام DLink 200 هست !! میخواستم بگم که از نوع USB هستش !!
یه router خوب و ارزون بهم معرفی کنید که USB بخوره

یعنی به جای لن ، usb داشته باشه؟
فکر نکنم همچین ap بشه پیدا کرد

[hba]

مودم Adsl , adsl2 كه روش wireless هم باشه سراغ داريد مدل بديد؟

يعني خودش Adsl و Wireless سر خود باشه كه نياز به كامپيوتر براي شير اينترنت نباشه ؟؟؟

[p3rtinax]

D-Link DSL-2640B > ADSL2/2+ Modem with Wireless Router



• Supports The Latest ADSL Standards for Superior Performance
• Access a High-Speed DSL Connection and Share The Internet
• Connect Multiple Computers and Share Files - Wired or Wirelessly

more info

[X32X]

مودم Adsl , adsl2 كه روش wireless هم باشه سراغ داريد مدل بديد؟

يعني خودش Adsl و Wireless سر خود باشه كه نياز به كامپيوتر براي شير اينترنت نباشه ؟؟؟

Asus AM604g
ADSL2+ Modem Router
and 4 port Smart Layer 3 Switch
and Wi-Fi 802.g+ Access point

[hba]

دستتون درد نكنه
همين ها كافيه به سوال دوستمون بپردازيد

[hashem_wolf]

این linksys WAG200G
رو هم Øتما ببینید! aDLS+AP+router+switch
تعداد پورت 4تا lan
,wan 1 پورت
----
قیمت: 108 هزار تومان
گارانتی ساخت سیستم

[terrorhell]

این linksys WAG200G
رو هم Øتما ببینید! aDLS+AP+router+switch
تعداد پورت 4تا lan
,wan 1 پورت
----
قیمت: 108 هزار تومان
گارانتی ساخت سیستم

رفیق این Router رو میتونم از کجا تهییه کنم ؟؟

[hashem_wolf]

Where to buy

To find a Local Value Added Reseller send an email to [email protected] or call us at :

+97-14-2246316

+98-21-88830602

[Spyn3t]

این linksys WAG200G
رو هم Øتما ببینید! aDLS+AP+router+switch
تعداد پورت 4تا lan
,wan 1 پورت
----
قیمت: 108 هزار تومان
گارانتی ساخت سیستم

این مدل بسیار کامل است ( VPN ppp over pppoe & good management& ... ) ولی متاسفانه در صورت فاصله زیاد از مرکز Ùˆ یا نویز روی خط زیادی Øساس عمل میکند Ùˆ مشکل ساز میشود

در کل مکافات دوست داشتنی

اما اگر linksys wrt54g گیر آوردید قدم به دنیای Øرفه ای ها گذاشتید

Below is the serial output of an unconfigured Linksys WRT54G V3.1. The Linksys runs default on 216Mhz, and has 16Mb RAM.


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri May 27 1352 CST 2005 ([email protected])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.

No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 216MHz
Total memory: 16384 KBytes

Total memory used by CFE: 0x80300000 - 0x803A2F80 (667520)
Initialized Data: 0x803391B0 - 0x8033B5A0 (9200)
BSS Area: 0x8033B5A0 - 0x8033CF80 (6624)
Local Heap: 0x8033CF80 - 0x803A0F80 (409600)
Stack Area: 0x803A0F80 - 0x803A2F80 (8192)
Text (code) segment: 0x80300000 - 0x803391B0 (233904)
Boot area (physical): 0x003A3000 - 0x003E3000
Relocation Factor: I:00000000 - D:00000000

Boot version: v3.5
The boot is CFE

mac_init(): Find mac [00BF08:1E] in location 0
Nothing...

eou_key_init(): Find key pair in location 0
The eou device id is same
The eou public key is same
The eou private key is same
Device eth0: hwaddr 00-14-BF-26-08-1E, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ...... 1601536 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029007
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 ([email protected]
om modifications) #11 Fri May 27 1332 CST 2005
Setting the PFC value as 0x15
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 2 at 216 MHz
Calibrating delay loop... 215.44 BogoMIPS
Memory: 14404k/16384k available (1368k kernel code, 1980k reserved, 108k data, 6
8k init, 0k highmem)
Dentry cache hash table entries: 2048 (ord
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Disabled
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
N_HDLC line discipline registered.
PPP generic driver version 2.4.2
Flash device: 0x400000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at b
le32_to_cpu(trx->magic)=0x30524448 trx->magic=0x30524448
bcm947xx_parts[1].offset=0x0 trx->offsets[1]=0x1 off
off=0xe77d4 off1=0x400000 size=0x400000
(Not Found Lang Block)off=0xe77d4 off1=0x3a0000 size=0x400000
nvram: offset=0x3f0000 size=0x10000
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x003a0000 : "linux"
0x000e77d4-0x003a0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o
nly
0x003a0000-0x003f0000 : "lang"
0x003f0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
cramfs: wrong magic
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 68k freed
SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,3)
ret = -1
www -> /www
mount: Inappropriate ioctl for device
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712
modules[0]=et buf=[et ]
modules[1]=ctmisc buf=[et ctmisc ]
modules[2]=wl buf=[et ctmisc wl ]
Needed modules: et ctmisc wl
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/ctmisc/ctmisc.o
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Hit enter to continue...type = [get_mac]
get_data(): cmd=0x11 count=8 len=18
get_data(): Get MAC count is [1]
get_data(): MAC 0: [00BF08:1E]
get_data(): done
type = [get_eou]
get_data(): cmd=0x13 count=5 len=522
get_data(): Get EOU count is [1]
get_data(): EOU 0: [IWNSDTJS2269af12c23f6db5408475d3d02be1496138a91a06 d4504be80d
38d29166605d777b59305af6bf1bd19bc6930b14a17143e6d2 f034090cbdd46c8b751e6a7f5c08f9
c0335b9a7bb63c25aabc933f4c03b1d2bbbf1b2f92ec2a99e8 b2f034f521981764aaddc4a9e877ba
1822275c8954012583d4af3dd8b3a09eb13110d75531c3018a bfa21218586d99465af0f8a74a7c41
13937c0871ae22f59753e2997766fa65a41203763af2f91d65 413eca3d81d61c00a67c334833b3bc
6b97ac5b7c609c6416f2a548e3824b4b96ad2afc68b37b4c63 070b09a5052154dceed8e477a03
c02b6a2c33c43c53dd02db9a9cbf7a8ab7f05b69159af7ba8b 5389917a2311]
get_data(): done
type = [get_sn]
get_data(): cmd=0x15 count=8 len=20
get_data(): Get SN count is [0]
get_data(): done
type = [get_flash_type]
get_flash_type(): cmd=0x17 count=0 len=0
Get FLASH TYPE is [Intel 28F320C3 2Mx16 BotB]
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The boot is CFE
The chipset is BCM4712L + BCM5325E
insmod: writemac.o: no module by that name found
rmmod: writemac: No such file or directory
killall: httpd: no process killed
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 0 to IF -:eth0:-
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Set ingress mapping on device -:vlan0:- Should be visible in /proc/net/vlan/vlan
0
Added VLAN with VID == 1 to IF -:eth0:-
WARNING: VLAN 1 does not work with many switches,
consider another number if you have problems.
Set ingress mapping on device -:vlan1:- Should be
1
Set ingress mapping on device -:vlan1:- Should be visible in /proc/net/vlan/vlan
1
Set ingress mapping on device -:vlan1:- Should be visible in /proc/net/vlan/vlan
1
Set ingress mapping on device -:vlan1:- Should be visible in /proc/net/vlan/vlan
1
Set ingress mapping on device -:vlan1:- Should be visible in /proc/net/vlan/vlan
1
Set ingress mapping on device -:vlan1:- Should be visible in /proc/net/vlan/vlan
1
Set ingress mapping on device -:vlan1:- Should be visible in /proc/net/vlan/vlan
1
Set ingress mapping on device -:vlan1:- Should be visible in /proc/net/vlan/vlan
1
The chipset is BCM4712L + BCM5325E
name=[vlan0] lan_ifname=[br0]
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
=====> set br0 hwaddr to vlan0
name=[eth1] lan_ifname=[br0]
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
Write wireless mac
Write wireless mac successfully
br0: No such file or directory
name=[eth2] lan_ifname=[br0]
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L +
eth2: No such device
br0: No such device
interface eth2 does not exist!
name=[eth3] lan_ifname=[br0]
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
eth3: No such device
br0: No such device
interface eth3 does not exist!
lo: File exists
The boot is CFE
tftp server started
tftpd: standalone socket
[HTTPD Starting on /www]
syslogd: 0: Unknown host
br0 192.168.1.100 86400
info, udhcp server (v0.9.8) started
zebra disabled.

Input=c3018abfa21218586d99465af0f8a74a7c4113937c08 71ae22f59753e2997766fa65
763af2f91d65413eca3d81d61c0calling upnp_main
0a67c334833b3bc6b97ac5b7c609c6416f2a548e3824b4b96a d2afc68b37b4c63070b09a5052154d
ceed8e477a03bf3c02b6a2c33c43c53dd02db9a9cbf7a8ab7f 05b69159af7ba8b5389917a2311

Output=c3018abfa21218586d99465af0f8a74a7c4113937c0 871ae22f59753e2997766fa65a4120
3763af2f91d65413eca3d81d61c00a67c334833b3bc6b97ac5 bNo interface specified. Quitt
ing...
7c609c6416f2a548e3824b4b96ad2afc68b37b4c63070b09a5 052154dceed8e477a03bf3c02b6a2c
33c43c53dd02db9a9cbf7a8ab7f05b69159af7ba8b5389917a 2311
Generate hash of public key:
6E E4 A6 97 A2 57 BB 5C 57 91 6E F6 E5 50 48 7F - F9 62 D7 BE

The EoU is already configured
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E

SES_SUPPORT_NEW_BOARD=1
In brcm_ses_event_get(), event in = In brcm_ses_event_notify(), event = SES_EVTO
_UNCONFIGURED!!!
In brcm_ses_event_get(), event in = SES_EVTI_NULL!!!
tallest:=====( wan_or_lan=wan )=====
tallest:=====( wan_or_lan=wan is wan !!)=====
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
The chipset is BCM4712L + BCM5325E
Hit enter to continue...info, udhcp client (v0.9.8) started
No interface specified. Quitting...
Hit enter to continue...SES_EVTI_NULL!!!

[Spyn3t]

پیشنهاد میکنم یکی از همین Symphony های بی نام و نشون پارس آنلاین مدل sy604g بگیرید

بعد فیرمر اصلی ASUS را روش بریزید

AM604G دارید که Stable تر از لینک سیس هاست

در مورد d-link خاطره خوشی از تعمیرش ندارم البته دلیلم شخصی